Skip to main content

Oh no, another massive recall could be on the way for the Nissan Rogue. There are multiple reports and complaints related to problems with the steering tie rod. Now the Nissan Rogue is being investigated for the loss of steering control. 

The Nissan Rogue could have tie rod failure 

The National Highway Traffic Safety Administration (NHTSA) just sprang into action to investigate the Nissan Rogue for potential steering tie rod failure. 

Reportedly, people have been complaining about inner tie rod failures that lead to the loss of steering control. This increases the risk of accidents and injuries. 

The NHTSA is looking into about 77,131 Rogue models from 2021. The evaluation will assess safety-related concerns as well as the scope, frequency, and root cause of the potential defect. 

Based on what the NHTSA finds, Nissan could be required to recall the affected models. The recall would probably involve replacing the tie rod and other components as needed at no cost to owners. 

However, this problem occurs in 2021 models and now it’s 2024. People may have already paid to have this problem corrected if it fell outside of their warranty. Hopefully, those drivers will be reimbursed. 

The 2024 Nissan Rogue driving on the road
2024 Nissan Rogue | Nissan

The average cost for a Nissan Rogue tie-rod replacement is between $212 and $229. Labor costs range from $63 to $80, while the parts cost about $149. However, taxes, fees, location, and related repairs aren’t included in this estimate. 

You might notice that your tie rod is failing if you feel a slight shift in the steering wheel that’s accompanied by a bump, click, or popping sound. Turning the steering hell will make similar noises. 

Also, you may notice a vibration in the steering wheel. In severe cases, one wheel may noticeably steer in a different direction without input from the steering wheel. 

Technically, you can drive for a few days after the tie rod fails, but that doesn’t mean you should. Doing so could create more problems as the ball-in-socket joints wear out and start to grind. The metal will eventually separate.

The investigation is still in the early stages. It may take a few weeks to conclude. Stay tuned for updates, because your Rogue might need to be repaired.